3 Conclusions

EVA FOAM MANUFACTURER / CPE for the vulcanization system expansion EVA foam manufacturer may be combined in any proportion ; with EVA FOAM MANUFACTURER / CPE = 60/40 when , EVA foam manufacturer best. Using EVA FOAM MANUFACTURER / CPE = 40/60, an amount of 180 parts of filler , the mill operation process best .

Vulcanization system, an amount of 11 parts of magnesium oxide or not when the optimum appearance . NA-22 without accelerator and magnesium oxide can also be cured , but : ① DCP dosage range is narrow , adding accelerator NA-22 to 1 parts , and vice versa. ② TAC dosage of 1.5 parts , DCP amount of 2.5 to 2.75 parts , EVA foam manufacturer agent 64 when the amount of 15 parts , EVA foam manufacturer to achieve the best speed and the cure rate .

EVA foam manufacturer system , EVA foam manufacturer agent 64 dosage increase , EL increases, but the amount of the limit of 16 copies.

Both products and tensile strength of the apparent total density and other factors , DCP should choose the amount of 0.5 parts .

2.2 EVA FOAM MANUFACTURER dosage on EVA FOAM MANUFEVA FOAM MANUFACTURERTURER products EVA foam manufEVA foam manufacturerturer impact